P.Energy MC04Ais a Class AAA sun simulator capable of measuring 80 modules per hour. Working with P.Energy MC04A, it can be put in line, as backend of an automatic pv line, making the production line integration straightforward and saving the factory footprint. Useable area is 1100 x 1900 mm (P.Energy MC04XL, the largest version of P.Energy MC04A has an useable area of 2050x1300 mm). All size of modules can be tested in the face down position.
Class AAA irradiance uniformity, spectral match, temporal instability:
- Xenon flash with Class A spectrum;
- Class A (±2 %) irradiance uniformity;
- Irradiance and temperature corrections according to IEC 891
Proprietary electronic load and data sampling system based on Endeas Oy:
- Measurement reliability surpasses IEC 904-1;
- Irradiance level adjustable from 200 to 1200 W/m2;
- Windows compatible data handling and saving options;
Superior productivity:
- 80 measurements per hour;
- low cost-of-ownership;
- straightforward factory integration
Flash System:
- Xenon flash filtered to conform to Class A spectrum.
- 6pcs 800 Ws flash heads and generators.
- Lamp life typically more than 100.000 flashes.
- Irradiance uniformity over 110 x 200 cm2 test area better than ±2%
Computer System:
- PC
- Display 17"
- Printer HP Laser-jet
- Bar code scanner (option)
- Data storage (option); IV curve (512 points) with evaluated parameters
Electronic Unit
- Load: HEXFET, sweep rate controlled by software;
- Current: Maximum current range options 10, 20 and 40A. Actual scales user adjustable from 0.5 to 10A or from 1 to 20A or from 2 to 40A with an absolute measurement accuracy better than 0.5% as calculated from the selected scale;
- Voltage: Maximum voltage range options 50, 100 and 200V. Actual scales user adjustable from 1 to 50V or from 1 to 100V or from 2 to 200V with an absolute measurement accuracy better than 0.5% as calculated from the selected scale;
- 4 Wire: Parallel voltage sensing terminals for excluding the losses in current carrying cables;
- Bias: Adjustable internal current power source for biasing the module to real short circuit;
- Irradiance level: Adjustable from 200 to 1200W/m² with 1W/m² resolution;
- Power: Reproducibility better than ±0.5%. Absolute accuracy depends on the accuracy of the module used for the calibration of the system.
- Monitor Cell: Crystalline silicon cell calibrated against the CEC JRC Ispra certified ESTI sensor. Gain 25 mV @ 1000 W/m2, 25°C. Temperature measured and irradiance signal corrected accordingly.
- Ambient Temperature: IC sensor (LM35). Accuracy ±1°C within 10-40°C. Operation temperature 10-40°C.
Inclusions
Spare parts: 1 lampConformity: CE approved
Warranty: 2 year
For further information contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it
