P.Energy L200 LIGHT is an automated laminator for photovoltaic modules. It is designed to process different sizes of laminates, made with different raw materials. It is possible to setup and save the best recipe for each kind of sandwich. P.Energy L200 LIGHT permits to laminate pv modules using standard cure EVA, fast cure EVA or ultra fast cure EVA.

- Plate dimensions: 2100 mm x 1125 mm
- Max thickness: 32 mm
- Touch Screen Panel to program the lamination cycle in very friendly way

Heating System

P.Energy L200 LIGHT has an electrical heating system which can reach 180°C.

Heating plate with Membrane Heating System (MHS). The Membrane Heating System it’s an innovative heating system that permits to improve heat transfer, speed warm up and decrease wattage requirements. The rod resisntances or oil based system resistance are replaced by Fiberglass-reinforced silicone rubber.

Heat up and cool down rate: ~ 7 K/min
Useable heating plate area: 2150 mm x 2050 mm
Temperature overflow: +/- 2 °C
Heating plate material: Aluminium
Thickness: 32 mm
Temperature distribution on heating plate area during heat up and within steady state: +/- 2 °C
Useable distance between heating plate area and upper chamber: 40 mm

Vacuum System

Vacuum Pump: Leybold (CH) ~ 100 m³/h (noise reduced):

- Ultimate value of vacuum: < 1 mbar
- Controlled vacuum values within lower chamber: 0-1000 mbar
- Controlled and programmable vacuum values within upper chamber: 0-1000 mbar

Control Unit

Siemens S7 with manual control interface: German, Italian, English, Spanish, French manuals.
 
Control unit/console

- Manual control for every single value
- Control of heating and coolign functions
- Over temperature alarm
- Automatic start of preselected working cycle with closing of upper chamber
- Definition of the pressure curve for the entire lamination cycle
- Manual activation of emergency functions in case of breakdown
- Alert in case of operational fault (wrong temperature or pressure values)

General instructions and requirements

- Integrated working time counter
- Noise reduction
- Friendly construction design
- Clamps in the upper chamber for an easy membrane changing
- Easy maintenance/removal of heating plates, clutches within vacuum chamber, fixed lead-through
- Total equipment availability: ≥  99 %

For further information please contact: This e-mail address is being protected from spambots. You need JavaScript enabled to view it